Product Categories
Contact Us

Covert Magnetic GPS

Parameter Device Name: CA-P3C Product Type: Magnet GPS Tracker Product Network: GSM/GPRS Frequency: 850MHz/900MHz/1800MHz/1900MHz GPS Solution: UBLOX GPS Chip GPS Sensitivity: -162dBm GPS accuracy: less than 10 meters Time To First Fix: Warm status 35 seconds Charger: DC5V Output Battery: DC3.7V...
inquiry
  • Parameter

    Device Name: CA-P3C

    Product Type: Magnet GPS Tracker

    Product Network: GSM/GPRS

    Frequency: 850MHz/900MHz/1800MHz/1900MHz

    GPS Solution: UBLOX GPS Chip

    GPS Sensitivity: -162dBm

    GPS accuracy: less than 10 meters

    Time To First Fix: Warm status 35 seconds

    Charger: DC5V Output

    Battery: DC3.7V 5000mAh

    Standby time:  100days.

    Certificate: CE RoHS

    Humidity: 5% to 95% non-condensing.


    Product Introduction: 

    CA-P5C uses 5000mAh rechargeable Li-ion battery. And the charger is AC110V to 240 input and DC5V output. The charger current is 1000mA. And the device supports low battery alert. When the battery will be used out. The device will send SMS alert message to mobile phone number. Generally the standby time is about 50days.


    Main Features:

    1. Long standby time and no power cable

    2. Plastic shell with magnet easy to install.

    3. Multi work modes for different requirements

    4. Anti-theft alarm: movement alarm and Geo fence alarm.

    5. Over speed alarm and auto track mode.


    Product Picture: 

    P3C-41112.png 

    P3C-41114.png

     

    Installation Instruction:                                       

    1. Please charge the battery full then install it.

    2. Please buy one SIM card support 2G GSM network.

    3. The GPS antenna side should face up to the sky.

    4. Make sure hide it in a secret place and have no metal above device.


    LED Indication:

    1. Blue LED for GPS signal status

    Status of LED

    Meaning

    Flash

    Searching GPS signal

    Always is on

    GPS antenna can receive satellite signal

    Off

    No power or sleeping mode


    2. Yellow LED for GSM signal status

    Status of LED

    Meaning

    Flash

    GSM module is searching GSM base signal.

    Always is on

    GSM base signal is normal and device can receive it

    Off

    No power or sleeping mode


    3. Red LED for power charging status

    Status of LED

    Meaning

    Always is on

    When device connects to charger and charge the battery

    Off

    The battery is charged full or power is off

     

    SMS commands Instruction:

    Single Locating

    Single message inquires the latitude and longitude, any telephone number can send command: “g1234” to the equipment, then the equipment will reply the latitude and longitude information to this telephone.

    P3C-42287.png 

     

    Google Link: Click link, there is map when positioning ok, no map means no positioning.

    ID: 8151293785 is ID code of device. And when you add this device to platform, it also needs to enter this ID.

    ACC: off stands for ignition is off

    V: Stands for no GPS Signal, if it is A, stands for GPS signal is ok.

    Speed: 0.07km/h, stands for the speed of tracker is moving.

    2016-01-05 15:53:40: stands for the GPS Signal of the last time.

    Tracking location, when GPS signal is too weak, the position of latitude and longitude are included in the SMS is the position that the tracker received GPS signal at last. If it is different with its exact current location, pay attention to check the time included in the SMS you got.

     

    Factory Picture:

    P3C-43071.png


    Hot Tags: covert magnetic GPS, China, manufacturers, factory, low price