Products Categories
Contact Us
Add: A Building, Gangshen Innovation Park, No.40, Huaning Road, Dalang Street, Longhua District, Shenzhen China
Contact: Jack Fu
Phone: +8615814051091
E-mail: info@gpstrackingfactory.com

Tracker for Car

Parameters: Model Name: CA-V2A Size: 90mm*45mm*13.8mm GPS location accuracy: 5meters Input voltage: DC9.5V to 39.9V GPRS: CLASS12, TCP/IP Working environment temperature: -20℃ to +70℃ Application: Truck/Car/motorcycle Antenna: Built-in Battery: 180mAh Li-ion battery GPS Chip: MTK Chip Product...

Send Inquiry

Parameters:

Model Name: CA-V2A

Size: 90mm*45mm*13.8mm

GPS location accuracy: 5meters

Input voltage: DC9.5V to 39.9V

GPRS: CLASS12, TCP/IP

Working environment temperature: -20℃ to +70℃

Application: Truck/Car/motorcycle

Antenna: Built-in

Battery: 180mAh Li-ion battery

GPS Chip: MTK Chip


Product Introduction:

CA-V2A is one simple GPS Tracker product. It uses the same protocol with GT06 model.

And it works environment humidity is 20% to 80% RH. The GPS Accuracy is less than 10meters. And it supports sleeping mode after device is static status for more than 5minutes and ignition is off.


Feature description:

Features

Description

Playback routes

Platform server can store routes for more than three months. User can check it via mobile phone or computer.

Setting function via SMS commands

You can change IP, Port, APN of the device via SMS message. And you can also check settings of the device.

Voice monitor

If you connect it to one microphone, then you can monitor the voice around device.

Burglar alarm

When someone wants to remove this device from your car and cut off the power cable. There will be alarm message to your mobile phone number.

Static state drifting protection

In the market most of devices has static state drifting issue. Our devices can avoid it.

 

Product Display:

LED Indicator:                                               

There are three LED indicators in this device. They are Red LED, Blue LED and Green LED. They stand for different signal.

Red LED is power status indicator. When it works with car battery. The Red LED will flash quickly. If you cut off power cable and it works with built-in battery, it will flash slowly and there will be alarm message on the platform.

Blue LED is GSM signal indicator. When you insert SIM card and turn on battery switch, it will always on, then it starts to search GSM signal, when the communication signal is normal, the blue LED will flash slowly. While it sends position data to server.

The LED will flash quickly.

Green LED is GPS signal indicator. If there is no GPS signal, this LED will always be on. When it can search GPS signal, it will flash quickly.

 

How to install?

Device works need on 2G SIM Card. Before you install it please buy one SIM card from your SIM card supplier. Make sure the network is 2G GSM and open GPRS function. It uploads data to server by GPRS internet.


Power cable contains four lines:

Red line and black line is power supply line.

Green line is ignition detection line.

Yellow line is one line can control relay on or off.


Application: 

 

 

FAQ:

Question 1:  What is your platform website?

            Our website is www.zcbgps.com

Question 2:  Can I control the engine on and off by this device?

             Yes, of course. You need to install one relay. Then you can control it.

Question 3:  Where I can install it?

             First the GPS antenna of device should face up to the sky. And hide it in a place no any metal above it.

Question 4:  The device contains vibration sensor?

             Yes, it contains vibration sensor and supports vibration alarm.


Hot Tags: tracker for car, China, manufacturers, factory, low price
Related Products

Copyright © Shenzhen Cartracker Technology Co.,Ltd All Rights Reserved.