Product Categories
Contact Us

GPS Locator Android

Parameter: Device Name: CA-MT06 Product Type: Magnet GPS Tracker Weight: 205g Working temperature: -35degrees to 80degrees Accuracy: less than 5 meters Sensitivity: -161dBm Frequency band: GSM850/900/1800/1900MHz Magnet: 4pcs magnet Battery: 6600mAh Standby time: >3 years Position:...
inquiry
  • Parameter:

    Device Name: CA-MT06

    Product Type: Magnet GPS Tracker

    Weight: 205g

    Working temperature: -35degrees to 80degrees

    Accuracy: less than 5 meters

    Sensitivity: -161dBm

    Frequency band: GSM850/900/1800/1900MHz

    Magnet: 4pcs magnet

    Battery: 6600mAh

    Standby time: >3 years

    Position: GPS+AGPS+LBS

    Antenna: Inner Antenna

    GPRS: TCP/IP


    Product introduction:

    MT06 Long battery GPS Tracker

    1. A strong-magnetic version (MT06C) is built into the product, and thus a detaching alarm function is achieved.

    2. The product has a plurality of positioning modes, including GPS, AGPS and base station positioning.

    3. It uses plastic shell, the terminal size is 80mm length,51mm width and 26mm Height.

    4. GSM module supports quad band, frequency is GSM 850MHz, 900MHz, 1800MHz, 1900MHz.


    Main function:

    1. Positioning monitoring: when being delivered, the main defaults that one piece of position information is submitted every 24 hours, the position information includes the positioning state, the longitude and latitude, the GSM signal intensity, the GPS satellite number, the battery voltage and so on. And the positioning information time interval can be set.

    2. Battery low voltage alarm

    The terminal can detect the voltage of the built-in battery at real time and can upload the voltage to a sensor at real time; when the voltage of the battery is lower than 3V, the terminal can make a battery low voltage alarm. At the moment, the uptime of the battery is already short, and the built-in battery needs to be replaced as soon as possible.

    3. High-magnetic function

    Five circular neodymium iron boron permanent magnets are built into MT06C, the equipment can be solidly adhered to the metal surface, thus being convenient and private to mount.


    Product Picture:


    SMS Setting:

    1. Closing positioning

    Instruction format: LBS,A#

    Instruction specification

    A=2 closing the positioning function; A=1 pure base station positioning mode; A=0 base station positioning, GPS positioning, AGPS; A=0 as default

    e.g. LBS,1# entering the pure base station positioning mode, and closing GPS module;

    2. The next time awaking time

    Instruction specification: T the next time awaking time, unit: minute, the instruction is used for correcting the awaking time;

    e.g. HXC,120#; awaking after hibernating for 120 minutes the next time.

    Notice: after the equipment enters into the tracking mode, please do quit from the tracking mode after the task is accomplished, or else the power of the battery can be used up within a short time as data are uploaded frequently.


    FAQ:

    Question 1: How long this device work?

               It can work for more than three years.

    Question 2: How much is the battery capacity?

               The built-in battery capacity is 6600mAh

    Question 3: Where is your platform server?

               Now our server is in China.

    Question 4: How about the standby battery consumption?

               It is only about 3uA.


    Hot Tags: GPS locator android, China, manufacturers, factory, low price